Description
ACG Kinna Automatic
2 pcs Production lines for orthopaedic bandages
YOC 2015
Machine parts included:
Log rolling, paper cutting, gluing and paper insertion onto the fibre,
vertical band cutting machine for bandages
Machine description:
The fibre roll is put on 2 belts that is design in V shape. The belts have the same speed as the roll up roller. Then the set length is reach, the machine is cutting the fibre. At the same time the paper is been measuring up and been cut. The paper is cut by a circular paper knife, and at the same movement the machine is put glue on the paper.It´s possible to control position and quantity of the glue. After rolling up and in feeding the paper around the roll, the machine is dropping the log on a conveyer belt. Then 6 logs have been dropped, the machine is transporting the logs into the cutting station. After the first cut the machine is eject the waist to the side and after that start cut up the set length on the bandages. The last knob of the log will be ejected then next
6 logs in feed to the cuting station.
Technical data:
Plc: Mitsubishi
Inverters: Mitsubishi
Cutting unit: Hyma
Air consumption: App 400 l/min
Power consumption: App 6 Kw
Air tube: 3/4″
Air pressure: 6 bar
Power supply: 400. 3 phase, 50 or 60 Hz + neutral
Fuse: 20 A
Maximum width on the in feed fibre: 1250 mm
Maximum diameter on the fibre rolls: 1500 mm
Weight on the fibre app: 70-90 gram/sqm
Maximum width on the in feed paper: 1200 mm
Maximum diameter on the paper rolls: 400 mm
Roll up length on logs: 1500 mm – 3000 mm (special case 10 Im as option machine 2)
Diameter on the logs: min 65 mm max 70 mm (spezial case 120 mm, as option machine 2)
Tolerance on the length on bandage: -0+20 mm
Minimum cut length: 40 mm
Tolerance cut length. -0+3 mm
Estimated gross production from the machine:
Production app. 4 logs a minute. Numbers of bandages depending on the cut length. All data is based on running 2,5 meters bandage length and a log diameter of 55-60 mm.
